This is a 10 Watt AC-DC Inverter LED Bulb's Driver PCB which used in both way AC and DC, It has a transformer to step down the AC Voltage, it has a four pin bridge rectifier IC (MB10F) to rectify the AC signal in to DC signal for charge battery. It has one non isolated IC which has 8 Pins , and it has a driver IC is used to drive the led, It has a Connector and has four wires in which two wires are for AC input and other two wires are for DC output.
Features:
- Its input voltage is 100-305V
- Its frequency is 50-60Hz
- Its output current is 300mA
- It has four wire two wires are for input
- And the other two wires are for output
- It has total 35 LED
Specification:
| Type | Inverter LED Bulb PCB LED Driver |
| Connection Point | N,L and -, |
| Input Voltage | 100-305V |
| Output Current | 300mA |
| Power | 10W |
| Driver's Diameter | 46mm |
| Bulb LED Diameter | 67mm |
| Inner Diameter of Driver | 20mm |
| Small holes Diameter | 3.0mm |
| Large Holes Diameter | 5mm |
| Output Voltage | 40-60V |
| Country of Origin | China |
